Beijer-electronics SCOM Protocol EN Manual de usuario descargar pdf (Pagina 112)

Command Reference

112 Elektronik-Systeme Lauer, MAEN976

Response Message (Negative Acknowledge)

Under normal operation conditions, a negative acknowledge message does not con-

tain any status data in response to this command. This response message is only sent,

if there is insufficient data in the command stream.

Maximum Lr for this Command

Example

Set digital port output bit 1 of the monitor at address 0.7 (group 0, address 7):

The monitor at address 0.7 (group 0, address 7) acknowledged, that the requested

digital port output bit is set:

0 1 2 3 4 5 6 7...8 9

0x15 ADR 0x4C 0x41 0x55 0x02 ICHKH 0x02 0x03 ICHKD

0 1 2 3 4 5 6 7...9 10

0x07 0x07

0x4C 0x41 0x55 0x03 0x0C 0x02 0x03 0x02 ICHKD

0 1 2 3 4 5 6 7...9 10

0x06 0x07

0x4C 0x41 0x55 0x03 0x0D 0x02 0x03 0x02 0xF8

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 142 143

Sin comentarios

Beijer-electronics SCOM Protocol EN Manual de usuario Pagina 112