Beijer-electronics SCOM Protocol EN Manual de usuario descargar pdf (Pagina 109)

Command Reference

Elektronik-Systeme Lauer, MAEN976 109

6.58 LAU_CONTROL_BUZZER (0x0202)

Buzzer Control

Activates the built-in buzzer, if available.

Supported since Firmware Version

MT223 NAV-230G: 1.0

MT226 NAV-230G: 1.0-DSCALE2

Command Stream

Response Message (Acknowledge)

Response Message (Negative Acknowledge)

Under normal operation conditions, a negative acknowledge message does not con-

tain any status data in response to this command. This response message is only sent,

if there is insufficient data in the command stream.

Maximum Lr for this Command

0 1 2 3 4 5 6 7...9 10

0x07 ADR 0x4C 0x41 0x55 0x03 ICHKH 0x02 0x02 Param ICHKD

Param

Value: 0x00: Disable buzzer

0x01: Enable buzzer

Type: Byte

Length: 1

Description: Buzzer control

0 1 2 3 4 5 6 7...9 10

0x06 ADR 0x4C 0x41 0x55 0x03 ICHKH 0x02 0x02 Ret ICHKD

Ret

Value: 0x00: Buzzer disabled

0x01: Buzzer enabled

Type: Byte

Length: 1

Description: Current buzzer state

0 1 2 3 4 5 6 7...8 9

0x15 ADR 0x4C 0x41 0x55 0x02 ICHKH 0x02 0x02 ICHKD

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 142 143

Sin comentarios

Beijer-electronics SCOM Protocol EN Manual de usuario Pagina 109