Beijer-electronics iX Panel TA150 EN Manual de usuario Pagina 22

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 45
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 21
Hardware Replacement
7.4 ReplacingtheDisplay/Display
Cable
The following is needed:
A ne w display/display c able, see Available Spare Parts for iX Panel TA150
AtorxT10screwdriver
Note:
MakesuretouseadequateESDprotection.
Follow the s teps below to replace the display/display cable:
1.
Power off the operator panel.
2.
Follow the instructions under Replacing the Rear Cover to remove the rear
cover.
3.
Disconnect the two ex cables the flex cable and the LED cable from the
power card and remove the two plastic nuts that hold the power card in place.
LED cable
plastic nut
display cable
plastic nut
4.
Lift the power card and gently remove the backlight cabl es and the display
cablefromtherearsideofthepowercard.
backlight cable
backlight cable
display cable
BeijerElectronics, MAEN014A
22
Vista de pagina 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 44 45

Comentarios a estos manuales

Sin comentarios