Beijer-electronics EPC TA70 AM EN Manual de usuario descargar pdf (Pagina 12)

Installation

Connect the cables in the speciﬁed order, according to the drawing and steps

below.

Caution:

• EnsurethatthePanelPCandthecontrollersystemhavethesameelectrical

grounding(referencevoltagelevel),otherwiseerrorsincommunicationmay

occur.

• ThePanelPCmustbebroughttoambienttemperaturebeforeitisstartedup. If

condensationforms,ensurethatthePanelPCisdrybeforeconnectingittothe

poweroutlet.

• Ensurethatthevolta geandpolarityofthepowersourceiscorrect.

• Useonlyshieldedcommunicationcables.

• Separatehighvoltagecablesfromsignalandsupplycables.

24V DC

RS422/RS485

24V DC

CF CARD

RS232

Controller

Power

Ethernet

– Connect cable A.

– Connect cable B, using an M5 screw and a grounding conductor ( as short

as possible) with a cross-section of minimum 2.5 mm

– Connect cable C.

– Connect cable D .

Carefully remove the laminated ﬁlm over the Panel PC display, to avoid static

electricity that could damage the panel.

3.2.1 OtherConnection

sandPeripherals

Cables, peripheral equipment and accessories must be suitable for the application

and its environment. For further details or recommendations, please refer to the

supplier.

BeijerElectronics, MAEN042

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 36 37

Sin comentarios

Beijer-electronics EPC TA70 AM EN Manual de usuario Pagina 12