Beijer-electronics CAN J1939 EN Manual de usuario descargar pdf (Pagina 4)

Cable Connection

The pins for the CAN connection are used according to the description below.

Settings in the Configuration Tool

Double-click on the Peripherals folder in the Project Manager in the configuration

tool for the operator panel.

Right-click on Expansion Port and select Fieldbus. Then drag Controller 1 or

Controller 2 with the corresponding driver to the Fieldbus icon. To change the se-

lected driver, select Properties from the Project menu.

For further information, please see the information for the driver.

Pin Description

1Not used

2 Connection to CAN High

3 Connection to CAN Low

4Not used

5 Connection to CAN Shield

Note:

The last user on the CAN bus must be terminated with R120

Ω.

12345

Expansion Module for CAN J1939

Installation

MAEN962 2009-02

English

1 2 3 4

Sin comentarios

Beijer-electronics CAN J1939 EN Manual de usuario Pagina 4