Beijer-electronics RBC EN Manual de usuario Pagina 2

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 25
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 1
Foreword
RBC Manual
Foreword
The Remote Backlight Controller (RBC) module is a part of the MTe monitor
series and of the EPC C2D Nautic series. The main purpose of this module is to
enable remote access to some of the monitor parameters or features, especially the
backlight.
Supported features are dependant on the device with the built-in RBC module.
Dimming can be carried out using the buttons on the front, or remotely by
interpreting SCOM commands received from the RS232, RS485 or USB
interface. The internal firmware manages all software tasks including the SCOM
command handling.
This manual describes the features, the configuratio n and the usage of the RBC
module.
Order no: MAEN986C
Copyright © 2012-05 Beijer Electronics AB. All rights reserved.
The information in this document is subject to changewithoutnoticeandisprovidedasavailableatthe
time of printing. Beijer Electronics AB , including all its group companies, reserves the right to change any
information without updating this publication. Beijer Electronics AB assumes no responsibility for any
errors that may appear in this document.
All examples in this document are only intended to improve understanding of the functionality and
handling of the software. Beijer Electronics AB cannot assume any liability if these examples are used in real
applications.
In view of the wide range of applications for this software, users must acquire sufficient knowledge themselves
in order to ensure tha t it is correctly used in their specific application. Persons responsible for the application
and the equipment must themselves ensure that each application is in compliance with all relevant
requirements, standards,and legislation in respect to configuration and safety. Beijer ElectronicsAB will
accept no liability for any damage incurred during the installation or use of this software. Beijer Electronics
AB prohibits all modification, changes, or conversion of the software.
Beijer Electronics, MAEN986C
Vista de pagina 1
1 2 3 4 5 6 7 ... 24 25

Comentarios a estos manuales

Sin comentarios